TECHNOLOGY
Multiart
High technology for the greatest productivity
Width (mm) – 6400 8000 9000 9600 12000 12800
Useful height (m) – From 2.50 up to 6.00
Arch spacing (m)- 2,00 2,50 3,00 4,00
Arches – 0.76 x 1,5/2,0mm
Truss- 0.32/42 x 15/2,0mm
Pillars- 8-x80 x 2,0/3,00mm
TECHNICAL FEATURES
Gutter support
The gutter support consists of two bent flanges with 30/10 thickness. They are positioned to the right and to the left of the post, respectively, and then bolted together. The shape of the flange allows housing and fastening the semi-arch and the horizontal tie rod. The upper part of the flanges feature bent and holed tabs for gutter support. The system as a whole is sturdy and efficient.
Gutter
The gutter channel manufactured by EUROPROGRESS provides significant benefits, such as high water flow rate. The slightly triangular base conveys condensate centrally towards an underlying collection duct. Depending on the needs, it is supplied with 15/10, 18/10, 20/10 thickness and SENDZMIR 450 or “HOT DIP” galvanisation. It is possible to install angles on the upper tabs where cloth fastening profiles are housed to collect condensate coming from the ridge.
Plastic film fastening with ALU/PVC profiles
The plastic film is rolled out onto the alluminium housing and then blocked by means of a double PVC joint (consisting of M/F bars). This system is mainly used to install a double film covering, and its advantages are:
The film is tensioned by wrapping and then tensioning it on a 30×30 mm tube line. All the mechanical parts (bars + jack) are completely hot zinc-coated to avoid any problem of rust and oxidation.
It ensures a perfect and fast tensioning.
Gutter support
The gutter support consists of two bent flanges with 30/10 thickness. They are positioned to the right and to the left of the post, respectively, and then bolted together. The shape of the flange allows housing and fastening the semi-arch and the horizontal tie rod. The upper part of the flanges feature bent and holed tabs for gutter support. The system as a whole is sturdy and efficient.
Gutter
The gutter channel manufactured by EUROPROGRESS provides significant benefits, such as high water flow rate. The slightly triangular base conveys condensate centrally towards an underlying collection duct. Depending on the needs, it is supplied with 15/10, 18/10, 20/10 thickness and SENDZMIR 450 or “HOT DIP” galvanisation. It is possible to install angles on the upper tabs where cloth fastening profiles are housed to collect condensate coming from the ridge.
Plastic film fastening with ALU/PVC profiles
The plastic film is rolled out onto the alluminium housing and then blocked by means of a double PVC joint (consisting of M/F bars). This system is mainly used to install a double film covering, and its advantages are:
- Greater duration of plastic film due to a lower heating of the profile
- Greater duration of the profile as a result of its anodised aluminium composition.
The film is tensioned by wrapping and then tensioning it on a 30×30 mm tube line. All the mechanical parts (bars + jack) are completely hot zinc-coated to avoid any problem of rust and oxidation.
It ensures a perfect and fast tensioning.
TECHNOLOGY
Multimed
Multi-span with the best quality/price
Width (mm) – 8000 8500 9000 9600
Useful height (m) – From 2.50 up to 3.50
Arch spacing (m)- 2,00 2,50 3,00 4,00
Arches – 0.60 x 1,5/2,0mm
Truss- 0.32 x 1,5/2,0mm
Pillars- 060 x 1,5/2,0/3,0
TECHNICAL FEATURES
Gutter support
The gutter support consists of two bent flanges with 30/10 thickness. They are positioned to the right and to the left of the post, respectively, and then bolted together. The shape of the flange allows housing and fastening the semi-arch and the horizontal tie rod. The upper part of the flanges feature bent and holed tabs for gutter support. The system as a whole is sturdy and efficient.
Gutter
The gutter channel manufactured by EUROPROGRESS provides significant benefits, such as high water flow rate. The slightly triangular base conveys condensate centrally towards an underlying collection duct. Depending on the needs, it is supplied with 15/10, 18/10, 20/10 thickness and SENDZMIR 450 or “HOT DIP” galvanisation. It is possible to install angles on the upper tabs where cloth fastening profiles are housed to collect condensate coming from the ridge.
Plastic film fastening with ALU/PVC profiles
The plastic film is rolled out onto the alluminium housing and then blocked by means of a double PVC joint (consisting of M/F bars). This system is mainly used to install a double film covering, and its advantages are:
The film is tensioned by wrapping and then tensioning it on a 30×30 mm tube line. All the mechanical parts (bars + jack) are completely hot zinc-coated to avoid any problem of rust and oxidation.
It ensures a perfect and fast tensioning.
Gutter support
The gutter support consists of two bent flanges with 30/10 thickness. They are positioned to the right and to the left of the post, respectively, and then bolted together. The shape of the flange allows housing and fastening the semi-arch and the horizontal tie rod. The upper part of the flanges feature bent and holed tabs for gutter support. The system as a whole is sturdy and efficient.
Gutter
The gutter channel manufactured by EUROPROGRESS provides significant benefits, such as high water flow rate. The slightly triangular base conveys condensate centrally towards an underlying collection duct. Depending on the needs, it is supplied with 15/10, 18/10, 20/10 thickness and SENDZMIR 450 or “HOT DIP” galvanisation. It is possible to install angles on the upper tabs where cloth fastening profiles are housed to collect condensate coming from the ridge.
Plastic film fastening with ALU/PVC profiles
The plastic film is rolled out onto the alluminium housing and then blocked by means of a double PVC joint (consisting of M/F bars). This system is mainly used to install a double film covering, and its advantages are:
- Greater duration of plastic film due to a lower heating of the profile
- Greater duration of the profile as a result of its anodised aluminium composition.
The film is tensioned by wrapping and then tensioning it on a 30×30 mm tube line. All the mechanical parts (bars + jack) are completely hot zinc-coated to avoid any problem of rust and oxidation.
It ensures a perfect and fast tensioning.
TECHNOLOGY
Multieasy
Cheap and flexible on big surfaces
Width (mm) – 6000 6500 7500 8000 8500 9000
Pillar height (m)- From 1.20 up to 1.90
Useful height (m) – From 2.30 up to 3.00
Arch spacing (m)- 1,50 2,00 2,50
Arches – 0.60 x 1,5/2,0mm
Truss- 0.32 x 1,5mm
Pillars- 060 x 1,5/2,0mm
TECHNICAL FEATURES
Gutter support
The gutter support consists of two bent flanges with 30/10 thickness. They are positioned to the right and to the left of the post, respectively, and then bolted together. The shape of the flange allows housing and fastening the semi-arch and the horizontal tie rod. The upper part of the flanges feature bent and holed tabs for gutter support. The system as a whole is sturdy and efficient.
Gutter
The gutter channel manufactured by EUROPROGRESS provides significant benefits, such as high water flow rate. The slightly triangular base conveys condensate centrally towards an underlying collection duct. Depending on the needs, it is supplied with 15/10, 18/10, 20/10 thickness and SENDZMIR 450 or “HOT DIP” galvanisation. It is possible to install angles on the upper tabs where cloth fastening profiles are housed to collect condensate coming from the ridge.
Plastic film fastening with ALU/PVC profiles
The plastic film is rolled out onto the alluminium housing and then blocked by means of a double PVC joint (consisting of M/F bars). This system is mainly used to install a double film covering, and its advantages are:
The film is tensioned by wrapping and then tensioning it on a 30×30 mm tube line. All the mechanical parts (bars + jack) are completely hot zinc-coated to avoid any problem of rust and oxidation.
It ensures a perfect and fast tensioning.
Gutter support
The gutter support consists of two bent flanges with 30/10 thickness. They are positioned to the right and to the left of the post, respectively, and then bolted together. The shape of the flange allows housing and fastening the semi-arch and the horizontal tie rod. The upper part of the flanges feature bent and holed tabs for gutter support. The system as a whole is sturdy and efficient.
Gutter
The gutter channel manufactured by EUROPROGRESS provides significant benefits, such as high water flow rate. The slightly triangular base conveys condensate centrally towards an underlying collection duct. Depending on the needs, it is supplied with 15/10, 18/10, 20/10 thickness and SENDZMIR 450 or “HOT DIP” galvanisation. It is possible to install angles on the upper tabs where cloth fastening profiles are housed to collect condensate coming from the ridge.
Plastic film fastening with ALU/PVC profiles
The plastic film is rolled out onto the alluminium housing and then blocked by means of a double PVC joint (consisting of M/F bars). This system is mainly used to install a double film covering, and its advantages are:
- Greater duration of plastic film due to a lower heating of the profile
- Greater duration of the profile as a result of its anodised aluminium composition.
The film is tensioned by wrapping and then tensioning it on a 30×30 mm tube line. All the mechanical parts (bars + jack) are completely hot zinc-coated to avoid any problem of rust and oxidation.
It ensures a perfect and fast tensioning.
